Home > Go EFI Systems >

Power Adder System for up to 600HP #30004 (Matte Black)



 
Alternative Views:


Our Price: $1,195.00


Product Code: 30004
Qty:

Description
 
The Go EFI 4 Power Adder 600HP is for the enthusiast that demands more from his system or is planning a future upgrade! This system is capable of 25 lbs of boost right out of the box and can be used in a blow through turbo, blower application, or on a single roots style "draw through" supercharger. You can also run a single stage of wet nitrous, control your A/F, and ignition timing.

Has all of the self tuning features you expect from the Go EFI systems with the extra PRO Features needed for higher output engines. Annular Swirl Discharge fuel distribution as well as Nitrous and Boost timing retard features make this a perfect choice for your Power Adder engine or your normally aspirated engine if you are considering future upgrades.





When Stepping up to the Go EFI 4 Power Adder 600HP here's what you will be getting:

30004 Kit Contents
  • Die Cast Throttle body
  • Handheld Controller
  • Windshield Mount
  • (4) Hi- Flow 600 HP injectors
  • Built-in pressure regulator
  • 2.5 BAR MAP Sensor
  • Throttle Position Sensor
  • Idle Air Control
  • Coolant Temp Sensor
  • Wide band O2 Sensor
  • O2 Bung Kit
  • -06AN Fuel Inlet Fitting
  • Gasket Kit
40003 Kit Contents
  • Sump Tank assembly w/340 L/PH fuel pump, regulator, pressure gauge
  • EFI Fuel Filter
  • Hose and Fittings to connect Sump Tank to Throttle Body

40005 Kit Contents

  • 255 L/PH external inline pump
  • EFI pre and post Fuel Filters
  • 20' of -6 fuel hose and 5' of -8 hose & fittings
  • Mounting brackets



  • Boost Ready Throttle Body

  • Boost Ready ECU 2.5 Bar MAP sensor good for 25 PSI!

  • NITROUS control with a host of safety features and accessories for Nitrous tuning

  • Nitrous and Boost specific target A/F target options

  • Boost and Nitrous timing retard strategies

  • 2 fan control (can set at separate temperatures)

  • Air-conditioning idle speed input kick up

  • Advanced hand Held Tuning Mode Enabled

  • Pro Laptop Software , COMPLETE TUNING FOR PROFESSIONAL TUNERS

You also get the standard features included in ALL of the Go EFI Systems:

  • 4 injectors capable of flowing 600HP of fuel

  • Initial setup is quick and easy. Simple touch screen selections get you up and running in minutes

  • Self-tuning** After startup the ECU immediately takes over and provides your vehicle with an optimum tune!

  • Basic install can be done with just 4 wires and 2 sensors to install

  • Uses the latest Bosch 4.2 wide band O2 sensor while all other sensors are easily replaceable GM style parts

  • The ECU is mounted on the throttle body so there is NO external boxes or harnesses to clutter up your engine compartment or under dash. This saves you a Huge amount of time and keeps things simple and neat.

  • Throttle bodies have a completely universal base to fit any 4-bbl manifold


  • All Go EFI’s feature Voltage Control fuel pump control. This feature reduces the voltage to the pump under low load conditions such as idle and cruise thus reducing noise and heat. This will extend the life of your pump and keep the fuel in the tank cooler and your ears from ringing!

  • Go EFI Systems feature Wet flow technology and have a unique Swirl Spray Annular discharge design that assures COMPLETE ATOMIZATION!! Check out our videos, you need to see it!

  • Ignition timing can be controlled and adjusted on the fly from your touch screen controller

  • Air Fuel ratios can be optimized on the fly as you drive! Try that with your Carb

  • Will work with CDI box but not required to control timing

  • Built in Fuel pressure regulator. No extra regulator to mount on your firewall.

  • Manufactured with OE engineering. Our ECUs are used Globally and pass Euro 5 emissions standards in new vehicles



Share your knowledge of this product. Be the first to write a review »